Direct rather than behind Caddy or nginx. This binary already serves TLS for the
control plane, so it is reuse rather than new machinery; one process with one
config file is most of what makes this thing pleasant to run; and a proxy on the
box would invite someone to eventually front the control plane too, which would
break SPKI pinning because clients pin that certificate's key.
The hard part of TLS is not termination, it is renewal - so the certificate is
re-read when the files change. No reload hook to write, and none to quietly stop
working months later and be noticed only after the certificate has expired. A
torn write (renewal tools write cert and key separately) keeps the previous
certificate rather than taking the listener down.
Not applied to the control plane, on purpose: clients pin that key, so replacing
it should cost an operator a moment's thought and a restart, not happen because
a file changed. Two listeners, two different right answers.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two gaps found while answering where configuration lives.
The confidential admin client needs a secret and there was nowhere to put one -
I had added the issuer and both client ids but not the secret the admin login
actually needs. It now reads from ECHOLOT_OIDC_CLIENT_SECRET, and preferably
from ECHOLOT_OIDC_CLIENT_SECRET_FILE: a secret in the environment is readable by
anything that can see /proc/<pid>/environ and lands in every dump of the unit's
config, whereas a path is one file whose permissions an operator can reason
about. (/etc/echolot-server.env was also 0644; now 0600 on fmr.)
And the server now refuses to serve the admin UI in plaintext on a non-loopback
address. The session cookie is a bearer credential for everything the server can
do, and the OIDC authorization code arrives in a URL; in the clear, both belong
to anyone on the path - and on a globally routable address that is the internet.
A hard stop rather than a warning, because a warning in a log is not read by the
person who most needs it, and because the safe answers are cheap: bind to
loopback and tunnel, or supply a certificate. ECHOLOT_ADMIN_INSECURE=1 overrides
it, so the decision is made rather than stumbled into.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Deploying v0.8.0 broke fmr, and the reason is a flaw I should have seen:
self-update is executed by the OLD binary, so the unit repair I put in the new
binary's updater cannot fix the very update that installs it. The unit kept its
argument-less ExecStart, the new binary answered that with usage and exit 2, and
the service went into a restart loop.
Fixed on fmr by hand, but that is not a fix for anyone else - and the whole
premise of an unattended self-update is that nobody is watching when it happens.
So: when started with no verb *and* systemd started us, the server repairs the
unit and serves anyway, loudly. systemd sets INVOCATION_ID for every service
invocation and nothing else does, so a person at a terminal still gets usage and
a non-zero exit. Marked as a one-release shim to remove once no deployment
predates --serve.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Running an unfamiliar binary by name should tell you what it does, not bind a
dozen ports and start answering the internet. --serve (or --daemon) now does
that, and a bare invocation prints usage and exits 2 - non-zero on purpose, so a
service manager sees a failure rather than concluding the server ran and
finished cleanly.
The hazard this creates is worth spelling out, because it bites once and
silently: three places started the binary with no arguments - the systemd unit,
the unit template, and the Dockerfile - and --self-update replaces the binary
but never the unit. A routine update would therefore leave a service that cannot
start, discovered whenever the host next rebooted.
So the updater repairs it: after replacing the binary it appends --serve to an
ExecStart that has no flags, but only in a unit this program wrote (identified
by its description). Editing an operator's hand-written unit would be overreach;
leaving ours broken would be negligence.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Explaining public vs confidential clients surfaced a gap in my own design: I had
assumed a single client id, but there are two clients here with genuinely
different properties.
the Android app public + PKCE, because an APK cannot keep a secret
the admin UI confidential, because the server can keep one in
/etc/echolot-server.env and weakening it to public buys
nothing
So the audience check now accepts either registered client id - and only those
two. "Any client of this issuer" would let every other application registered
with the same IdP authenticate here, which is the entire reason the check
exists. Either id alone is enough to enable sign-in, since an operator may
register only the app or only the admin UI.
The profile advertises the *app's* client id, since that is what a phone should
authorize as.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
If the IdP is misconfigured, unreachable, or the admin group is a typo, the
operator is locked out of their own server with no way back short of editing
JSON on disk. A fallback that only matters when everything else is broken is
exactly the thing you cannot add later - by then you cannot get in to add it.
Stored as PBKDF2-HMAC-SHA256 from the standard library (Go 1.24+ has it, so no
dependency), 600k iterations, per-credential salt. A password rather than a
bearer token on purpose: a break-glass credential is the one most likely to end
up in a backup or a config-management repo, and a hash survives that where a
token does not. There is no email reset flow and should not be -
--set-admin-password on the host is the reset, and whoever can run it already
has the machine.
The password is read from stdin, never a flag, so it stays out of shell history
and the process list; piping still works for automation.
Details the tests pin, each for a reason:
- the username is compared in constant time too, or a fast rejection is a
timing oracle for which usernames exist;
- the *stored* iteration count is used, so raising the constant later does not
lock out existing passwords;
- the throttle grows with consecutive failures but stays bounded and forgives
after a quiet minute - a break-glass credential an attacker can lock out is
a denial of service against the one person who needs it;
- sessions are MAC-checked before anything in them is read, and rotating the
secret invalidates every one at once, which is how they are revoked.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Echolot delegates identity to whatever IdP the operator already runs and stores
no passwords - no hashing, no reset flow, no lockout policy, and no credential
database to lose. For a tool people self-host next to other services, that is
the difference between one more service and one more thing that can leak
someone's password.
Verification is stdlib-only, matching the server's no-dependency rule. Longer
than jwt.Parse, and auditable in one sitting. The part that matters is the
algorithm allow-list: taking `alg` from the token is the classic forgery, so it
is fixed in code. Tests cover the real attacks against a genuine signer - a
self-contained IdP with real keys, because a mock that returns success proves
nothing about a verifier:
alg=none, HS256/RS256 confusion, a payload swapped under a valid signature,
a token addressed to another client, a token from another issuer, expired
and future-dated tokens, and discovery that renames the issuer (which would
otherwise have us fetch a stranger's keys believing they were the provider's).
With no admin group configured nobody is an admin. An operator who has not said
who may administer the server has not thereby said "anyone who can log in".
Device and account stay separate concepts: enrollment admits a device (operator's
token), signing in attributes it to a person (POST /v1/account/link, device
credential plus ID token - both required, neither substitutes). uploads=account
now means what it says instead of refusing everyone, and signing in does not
override uploads=off.
The profile advertises the sign-in configuration so the app can offer the button
only when there is something behind it, and drive PKCE without anyone typing an
issuer URL. A discovery failure is reported rather than hidden, so "configured
but the provider is not answering" is distinguishable from "not configured".
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
At `full` the anonymizer returns the document unchanged, so the salt has nothing
to act on - but the switch was enabled and looked like it did something. A
control that silently does nothing is the same class of fault as the preview
button and the archived-level label: the screen implying more than is true.
Shown disabled with the reason rather than hidden. The setting is still stored
and applies the moment the level changes, so making it vanish would hide state
that is still there; and a settings screen whose controls appear and disappear
as you touch other controls is harder to trust, not easier. The label dims with
the switch so "not active right now" reads at a glance.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Running the Shizuku tier for the first time uploaded every MAC address on the
local network to the server at the balanced level - fourteen of them, router and
all. The probes embed raw command output verbatim (ip neigh, ip route), which is
good evidence and also a complete household device inventory, and the anonymizer
could not see it: classification is by field name and whole-value shape, and
ip_neigh is one long string that is itself neither a MAC nor an address.
measurement-schema.md flagged raw dumps as hard to anonymize and proposed
dropping them from exports. Scrubbing is better: identifiers inside unclassified
strings are replaced in place with the same pseudonyms used elsewhere, so a MAC
appearing in both a parsed field and a raw dump still reads as one device, and
the dump stays readable - neighbour-table shape, host count, RFC1918 addresses
and vendor prefixes all survive. Dropping it would have protected the same data
by destroying the reason for collecting it.
One pass, not three: sequential passes re-process their own output. Once a MAC
became 78:9a:18:xx:yy:zz the IPv6 pattern matched it - six hex groups separated
by colons is an address - and destroyed the vendor prefix the MAC rule had just
preserved. Ordered alternation resolves each position once, MAC first.
RealDocumentTest runs the anonymizer over a captured run when ECHOLOT_REAL_RUN
points at one and fails on any surviving MAC; it self-skips otherwise so no
one's network lands in the repo. Against the document that leaked: 14 in, 0 out.
Also: the Settings preview button did nothing, reading UiState.history which is
empty until the History screen has been opened - same root cause as the "0
run(s)" count. It reads the archive now, and says when there is nothing to show.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
3125 sent, 3125 counted by the server, 0% loss. The assertion that earns its
keep is received <= sent: that is what catches a counter that was never reset
between runs, which would otherwise look like a suspiciously good result.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The client generates the traffic and the server counts it. No grant is involved
- the client is sending its own packets, so there is nothing to amplify - but it
does need the server's tally, because only the far end knows how much arrived.
Without that number a sender measures how fast it can transmit, which is usually
just the speed of the local NIC and is not the question being asked.
A new wire type the server counts and deliberately never answers: a reply would
double the traffic and drag the return path into a measurement that is
specifically about the outbound one.
The tally is a counter, not a list, and short-circuits before the observation
log. A five-second run at 20 Mbps is around ten thousand packets; one struct
each would turn a measurement into an allocation storm on a shared server, and
nothing needs the per-packet detail since the client holds the send-side record.
The gap between the two counts is the loss.
direction=up on the throughput action sends nothing - it zeroes the counter, so
a second run in one session measures itself instead of inheriting the first.
Same honesty rule as downstream: measures_network is false when what arrived
matches what was offered, because then the path was never the constraint.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The registry was only used in core-engine. The app still emitted seven codes as
raw strings, so the registry test passed while codes lived outside it - among
them ipv6.broken, which fired on a real network and was in no registry at all.
All seven now take their code, category and severity from a registry entry, so
those three cannot disagree at a call site. Grepping for code = "..." across the
app, engine and probe modules now returns nothing.
ipv6.* -> v6.* is the third instance of the same rule being broken: they
declared Category.IPV6 while the prefix map only knows "v6", so
TestType.category("ipv6.broken") fell through to connectivity and the finding
rolled up under the wrong verdict light. The test-type registry already used v6.
Two severities reconciled rather than assumed:
connectivity.captive_portal is medium, not high. The registry had guessed
high; the probe emitting it had always said medium, and the probe was the
considered value - a captive portal on hotel wifi is what should be there.
no_internet keeps high, since nothing local fixes that.
v6.not_offered stays info, and the registry now says why it must. Most
networks still do not offer IPv6; a warning there lights a yellow verdict on a
healthy network and teaches people to ignore the light.
Plus a BackHandler: the screen was a plain state variable with nothing tying it
to the back stack, so Back left the app from Settings/History instead of
returning to the run screen.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A row read "22 kB · full" directly beneath "uploaded to fmr", while the status
line above said the upload went as BALANCED. Both were true and they described
different documents: the row showed ArchivedRun.anonymization, which describes
the *archived* copy - deliberately unredacted, so always "full" - and the status
line described the *uploaded* copy.
Read together, that says the complete data was uploaded when a redacted copy was
sent. A privacy display that overstates what left the device is worse than none,
and telling the user what left the device is the one thing this screen is for.
The level a run was uploaded at is now recorded separately (uploaded_as) and the
row says "kept complete on this device" / "uploaded to fmr as balanced" - each
label naming the copy it belongs to.
Two more from the same screenshot:
- Every row showed no verdict. The archive read summary.verdict; the schema
calls it summary.overall. Silently null on every run, so the list's most
prominent element was blank while everything else looked fine. The test
fixture had the same wrong field name, which is why it passed.
- The status line rendered the server's raw JSON index entry into the UI.
Verified on device: a fresh run archives with verdict "yellow" and
uploaded_as "balanced" beside anonymization "full".
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Found in a real uploaded run from the phone: the server held
fda1:3fb1:ff92:6696::2662 for a DNS server. The general IPv6 path keeps the
leading two groups on purpose - for a global address that preserves the ISP
allocation, which is the useful part - but for a ULA that passes through 32 of
the 40 random bits of the global ID.
A ULA looks like the v6 RFC1918 and the instinct is to treat it the same. It is
not analogous, and the difference is the point: an RFC1918 prefix is shared by
millions of networks and identifies none of them, while a ULA global ID is
random and unique to one network by construction (RFC 4193). The prefix IS the
identifier, so it was a network fingerprint surviving redaction.
Pseudonymized as a unit now, so two addresses on one ULA subnet still share a
pseudonymous prefix - "these hosts are on one network" survives, "this is that
network" does not. RFC1918 stays readable, and the contrast is what justifies
it; a test pins both halves.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
On-device verification found both.
safeDrawingPadding() was on the run screen but not on Settings or History -
they were added later and never got it - so "< Back Settings" sat under the
status-bar clock. The same fault the run screen had already fixed, reintroduced
by new code that did not know about it.
Settings also read "0 run(s), 23 kB stored": the count came from
UiState.history, which stays empty until the History screen has been opened,
while the size read the archive directly. Two sources for one fact; the count
now reads the archive too.
Verified on a OnePlus 15 (A16): header clears the status bar, count reads
"1 run(s), 23 kB stored".
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Setting out to build the machine-readable schema, the first step was checking
whether the anonymizer covers the fields the schema declares sensitive. It did
not, and five identifying values were going out at the `balanced` level:
networks[].link.addresses[].addr the device's own global IPv6 address
networks[].link.routes[].gateway the ISP allocation
networks[].link.dns.servers[] the configured resolver
private_dns_hostname an internal hostname
search_domains[] the internal domain
The settings screen describes that level as pseudonymizing addresses.
Root cause: classification keyed on field names, and the schema's actual names
were never added to the table. Every existing test passed, because each checked
a field somebody had remembered to write a case for - an unfalsifiable design
for a privacy control.
So beyond adding the names, classification now falls back to the *value* when
the name is unknown: anything shaped like an IPv4/IPv6 address or a MAC is
treated as one. Hostnames deliberately are not inferred by shape, since
train.udp_updown is indistinguishable from a domain and mangling a test type
would corrupt the document to protect nothing.
LeakTest is the guard, and is written to fail for fields nobody thought of: it
plants identifying values wherever one can occur and asserts none survive. It
also pins that RFC1918 addresses stay readable, so it cannot pass by
over-redacting. Route prefixes and :: needed care - 0.0.0.0/0 must stay itself
or a routing table becomes unreadable for no privacy gain.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A finding code is the stable half of a result - what a dashboard groups by and
what someone greps a year of archived runs for. That only holds if a code means
exactly one thing forever, which fifteen ad-hoc string literals cannot promise.
By the time this was written the failure had happened twice:
- Two emitters independently produced connectivity.downstream_loss and
connectivity.loss_downstream for the same claim. Nothing objected. Anyone
aggregating either would have silently seen half their data.
- Two codes sat under nat.* while being declared Category.CONNECTIVITY.
nat.udp_unreachable is not about NAT, and the prefix decides the category,
which decides which verdict light the finding rolls up into. Renamed while
that is still cheap.
Codes are now typed FindingSpecs carrying category and default severity;
emitters reference the spec rather than retyping the string, so a typo is a
compile error and two call sites cannot disagree about a finding's category.
docs/findings-registry.md is the contract and a test reads it, failing when the
document and the code disagree on which codes exist or how severe they are.
Documentation that drifts from its implementation is worse than none, because it
still looks authoritative. The check reads table rows only, so the prose can go
on explaining which codes were retired and why.
Closes open item 1 of measurement-schema.md section 9.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A 5-second run at 50 Mbps moves ~30 MB. On a metered connection that is the
user's money, and a measurement tool that spends it unasked is not one people
keep installed.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The live throughput test found it: a 3-second run delivered 104 packets and
stopped after 50 milliseconds.
The rate check exempted the first 50 ms entirely, meaning to be lenient at
startup. The effect was the opposite. A sender could dump an unbounded burst
into that free window, and the instant the check switched on it compared those
bytes against 50 ms worth of allowance and refused everything until real time
caught up. Every short test passed — downtrain sends 50 packets, big_send seven
— and every sustained send died about fifty milliseconds in.
A token bucket (allowance = burst + rate x elapsed) has no such cliff; it is
smooth from t=0. The burst is 100 ms of the allowed rate, floored at one
ordinary datagram so a single packet is never refused outright. The floor is
deliberately one datagram: at 8 kbps a 64 KB floor would be sixty-four seconds'
worth, which is precisely the instant dump the ceiling exists to prevent. The
existing rate test caught that when I first tried it, and it was right.
Second half of the same bug: callers treated any refusal as terminal. TryAllow
now says why, so a sender can pace through a transient "too fast just now" and
still stop dead on a spent budget or an expired grant.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A throughput number reports the smallest limit on the path, and the sender's own
ceiling is one of the candidates. If the server was asked for 50 Mbps and 50
Mbps arrived, the network was never the constraint and "50 Mbps" says nothing
about it. So the result always carries limited_by and measures_network, and a
finding is raised only when the path is actually implicated.
Loss is computed against the *sender's* count, not the requested rate: the
server reports what it put on the wire, and the gap is the loss. A receiver
alone cannot tell "the network dropped it" from "the sender never sent it", and
guessing turns a healthy server-side limit into a phantom network fault. The
count is stored per action, not per packet — half a million packets of structs
would turn a measurement into memory exhaustion.
Sending is paced rather than flat out. An unpaced burst measures the server's
NIC and the first queue it meets, then collapses into loss that reads as a
network fault. The schedule is absolute rather than sleep-per-packet, which
would accumulate scheduler error and drift the rate down over a ten-second run.
Throughput gets its own grant budget sized from the request, so every other
action stays bounded at 8 MiB. When the byte cap binds before the clock does,
the *duration* is shortened and reported, rather than the run being truncated
halfway: promising thirty seconds and delivering twenty-one is the same
information with a surprise attached, and it keeps "the clock ended the run" as
the normal case — the only case where the rate is a clean property of the path.
That last behaviour came out of a test that failed honestly: 30 s at 100 Mbps
needs 375 MB against a 256 MB cap.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Letting the kernel fragment an oversized datagram answers one question — do
fragments get through. It cannot answer the more interesting one, because the
kernel always emits them in order, first one first.
The classic middlebox fault is exactly about that ordering. Only the first
fragment carries the UDP header, and therefore the ports; a stateful firewall
or NAT that has not seen it has no flow to match the rest against, and many
drop them. That is invisible to any in-order test and shows up in the field as
"large DNS answers fail on this network" or "the tunnel breaks when the MTU
drops" — it works until the network reorders, then fails intermittently, which
is the hardest kind of fault to chase.
So the server now builds the fragments itself (raw socket, IP_HDRINCL) and
controls their order: in_order as a baseline, reversed, and first-fragment-last.
The datagram is assembled and signed whole before being cut up, so what the
client reassembles is indistinguishable from an ordinary packet — otherwise it
would be measuring our sender rather than the path.
Two details that would silently produce wrong answers:
- The UDP checksum is computed rather than left zero. A zero-checksum datagram
is dropped by some middleboxes, and that drop would be recorded as a
fragmentation failure, which is the wrong conclusion entirely.
- Fragment offsets are in 8-byte units, so non-final fragments are rounded to
a multiple of 8. A 100-byte fragment is not an error, it is a datagram no
host will ever reassemble.
frag-send is advertised only when a raw socket can actually be opened — checked
by opening one, since a permission model has more ways to say no than a
capability bit has to say yes.
Fragment header arithmetic is unit-tested (reassembly coverage, MF flags, shared
IP ID, 8-byte offsets, checksum verification), cross-compiled and run on Linux
since the code is build-tagged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
"3 % loss" sends an engineer looking in both directions at once. The server
records every packet it received per sequence number, so the two cases are
distinguishable: sent-but-never-seen is upstream loss, seen-but-no-reply is
downstream. The findings say which, and say what is not implicated.
Downstream loss is measured against what reached the server, not against what
was sent — the other denominator counts every upstream loss twice and
overstates the return path.
Per-direction jitter comes out of the same records without needing synchronised
clocks: (server_rx - client_tx) carries a constant unknown offset, and
differencing successive samples cancels it, so RFC 3393 variation is honestly
attributable to a direction even though absolute latency is not.
Correlation is by wire sequence number, not loop index — the counter is shared
with every packet type on the session. ProbeSession exposes it even for a lost
probe, since that is precisely the packet whose direction is in question.
Live against fmr: 0.08 ms upstream jitter vs 0.85 ms downstream, an asymmetry a
round-trip test cannot see.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Scanning beats pasting a 200-character string onto a phone, and with a device
attached the deep link can be delivered by adb with no typing at all.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The previous commit's edit to the admin handler silently did not apply, so the
endpoint still returned just the token. Caught by deploying and looking at the
response rather than by trusting the build to have picked it up.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
POST /admin/enroll-tokens now returns the whole link, not just the token:
echolot://enroll?v=1&u=<control URL>&p=pin-sha256:<b64>&t=<token>
The server is the only party that knows all three parts at once, and the part
an operator gets wrong by hand is the base64 pin — which does not fail loudly,
it just never matches, surfacing days later as an inscrutable TLS error. The
app takes the link from a paste or from an echolot:// deep link (QR scan), and
writes URL, pin and credential together or not at all.
One trap the tests pin: an unencoded "+" in a query string decodes to a space,
so a hand-assembled link arrives with a pin wrong by one character. Base64 has
no spaces, so they are restored — unambiguous, and it cannot damage a correctly
encoded pin.
Also fixes a spec divergence: §2.1 names the field device_credential and the
first implementation shipped "credential". Both are sent now and the client
prefers the spec's; the alias goes once nothing reads it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The server's 426 body reached the user as "needs \u003e= 0.2.0, \u003c 1.0.0":
Go escapes <, > and & by default for JSON destined for a page, which this is
not. Disabled at the encoder. The client now parses the error field rather than
pattern-matching it, so it survives whatever a future encoder decides to escape.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The generated refusal read "point at a app within range". Also adds
LiveCompatTest, which checks the half a unit test cannot reach: that two
independently-built artifacts agree on the window, that the profile stays
readable for a version the server refuses, and that both bounds are enforced.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Both sides now declare what they will talk to, and enforce it. Two axes kept
deliberately separate, because conflating them is the trap:
protocol_version — CAN these builds talk. The correctness axis. Below 1.0.0
the minor is the breaking axis, per SemVer §4.
release window — MAY they, per policy. [min, max), advertised in the
profile, overridable by the operator.
The server refuses out-of-window apps with 426 and a body naming both versions
and the accepted range; the app checks the profile in both directions before a
run rather than discovering mid-measurement that it will be refused.
Three rules that shape the rest:
- GET /v1/profile is never gated. It is where a refused client learns which
version it needs; gating it leaves the user with a network error instead of
an answer, which is precisely the confusion this exists to remove.
- An unparseable or absent version is "unknown", and is allowed. Development
builds report "dev", and a client too old to send the header cannot be
identified anyway.
- Bounds sit at breaking boundaries, not at releases, so shipping a patch
never requires editing a range. The app's server minimum is 0.4.2 for a
stated reason: earlier multi-homed servers mis-addressed granted sends and
the client measured 100% downstream loss that never happened.
The app's versionCode is now derived from its SemVer instead of being a second
number someone has to remember to bump.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Three facts the client cannot produce alone, kept deliberately separate:
mtu.pmtud_down (largest datagram that arrives unfragmented — meaningful only
because the server sets DF), mtu.frag_delivery (whether larger ones arrive once
fragmentation is allowed), and train.udp_downstream (loss, reordering and
arrival spacing in the download direction, which a round trip cannot separate
from upstream loss).
ServerMeasurement now runs them on the same ProbeSession as the echo train. It
had to: a fresh session restarts client-side sequence numbers and the server's
anti-replay window discards the lot, so the re-primed source is never recorded
and every granted send goes to a socket that has already closed. That produced
four confidently-wrong FAILED tests and a RED verdict on a healthy network.
Live against fmr: path MTU 1500, fragments to 4000, 100/100 downstream, GREEN.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
fmr binds two IPv4 addresses. connFor picked whichever socket of the right
family came first in the bind list, so a downtrain for a session established on
.150 went out from .151 — and every packet was dropped by the client's NAT,
which has no mapping for that pair. tcpdump on the server showed all 50 leaving;
the client saw none. Read as "100% downstream loss", which is the worst kind of
wrong: a confident measurement of something that never happened.
Sessions now record which of our own bound addresses received their traffic, and
granted sends (and delayed echo) go back out through that socket. The fallback
to a family match is kept for the case where nothing has been received yet, and
the test pins both paths — a single-homed lab can never reproduce this.
Also: the client-side halves of the same work — anonymizer (core-privacy), local
run archive with retention (core-archive), upload client, and the app's settings
and history screens.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
big_send now forces the Don't-Fragment bit for the whole burst by default, so
the largest size that arrives IS the downstream path MTU rather than "fragments
got through" — two different measurements the schema already separates. Sizes
above our own egress MTU (from the startup self-test) are refused up front and
reported as max_df_bytes, because absence caused by our kernel must not be read
as a limit of the client's path.
Uploads: one JSON file per run under the state dir, with the policy the operator
actually cares about — who may upload (off / anonymous / account), how large,
how long to keep, and the least anonymization accepted. The profile advertises
all of it so the app can present the switch honestly instead of discovering the
rules by failing. `account` refuses today rather than falling back to anonymous:
picking the strict setting before OIDC lands must not silently mean the loose one.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The grant is the keystone that makes server->client sends safe: created
only by an authenticated control-plane action, bound at creation to the
session's OBSERVED data-plane source (so it can never be aimed at a third
party), and bounded by bytes, average rate and expiry. Sends stop the
moment the budget runs out, so a buggy action cannot become a flood.
Two granted actions on top of it:
- downtrain: N packets at a given size/interval toward the client, with
seq + send-timestamp in the payload — downstream loss/reorder/jitter,
which an upstream-only train cannot measure.
- big_send: one datagram per requested size, echoing the intended size in
the payload — downstream MTU / black-hole evidence the client cannot
produce for itself (only the far end can emit a large packet toward it).
Tests cover the security properties: no grant without a verified
destination, client requests clamped to server limits, byte budget stops
sending exactly, expiry refuses, and the rate ceiling throttles a burst.
Capabilities gain downtrain + big-send.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Verified against Shizuku 13.6's manifest (pulled APK, aapt2 xmltree): its
wireless-debugging entry points (AdbPairingTutorialActivity,
AdbPairingService, StarterActivity) have no intent filters, so they are
not exported and cannot be launched externally; MainActivity answers only
MAIN/LAUNCHER with no deep link. Starting wireless debugging from another
app is therefore not possible, which is why the handoff lands on the
root-start screen.
Instead the hint now names the exact steps inside Shizuku ("Pairing", then
"Start"), and a second tap opens Developer options — that action IS public
and exported, and Wireless debugging has to be on before Shizuku's
wireless start works.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A third-party app cannot start Shizuku — the wireless-debugging pairing
flow is privileged and lives in Shizuku's own app — so the banner
deep-links there when it is installed but stopped, and fires the
permission request directly when it is running but unauthorised. The hint
line says which.
Verified on-device together with the earlier UX work: progress bar showing
"test 4 of 8 · icmp.ping6 · ~33s left", Cancel beside the disabled Run
button, cutout-safe title, and the banner live-updating from
not-running to needs-permission via the binder listener.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Distinguishes not-installed (say nothing — don't nag users who don't use
Shizuku) from installed-but-stopped (amber banner: start it to include
shell-tier tests), plus running-unauthorised and ready. Detection is
listener-based since pingBinder() only becomes truthful once
ShizukuProvider delivers the binder; a launch-time poll would show a false
"not running". Installed-vs-not needs the <queries> entry on Android 11+.
Verified on-device: with shizuku_server stopped, the banner shows before
pressing Run; the title also now clears the status bar/cutout after the
safeDrawingPadding fix.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Probe.estimatedMs (measured per probe; timeout-bound ones dominate)
drives a determinate progress bar and "test N of M · ~Xs left",
including the Shizuku battery in the total.
- Cancel stops the run and shows the partial results as a normal document
(findings + verdict over what was collected) but never uploads them.
- safeDrawingPadding() on the root column: Android 15 is edge-to-edge by
default and the title was colliding with the status-bar clock and the
camera cutout.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The probe identified the LAN's IPv6 RA sender end to end from an
unprivileged app: EUI-64 MAC recovery (78:9A:18:54:B8:F9, matching the
Shizuku neighbor table) -> MikroTik by OUI, corroborated by the UPnP
device description (RouterOS/7.23.2, MikroTik Router) and reverse DNS
(router.hudelist.local). Cellular's RFC 7217 privacy RA source is
correctly reported as not-EUI-64 instead of guessed. The SSDP sweep also
inventoried a Synology DS1522+ and a Sky gateway — the raw material for
future LLDP/mDNS cross-matching.
Fixes found by running it: added the confirmed MikroTik OUI 78:9A:18 (+
other RouterBOARD ranges) and an elvis-operator bug that printed "no UPnP
response" alongside valid UPnP data.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
link.ra_source answers "who advertises IPv6 here, and which box is it":
RA source per network, MAC recovered from the modified-EUI-64 link-local
(privacy addresses reported as such, not guessed), vendor via a curated
OUI table, UPnP/SSDP M-SEARCH for the gateway's server banner + device
description (manufacturer/model/friendly name), and reverse DNS. All SSDP
responders are recorded so a rogue RA sender that isn't the gateway can
still be matched; the MAC accompanies every identity source as the hook
for future LLDP/mDNS cross-matching. UI gains a "Router / IPv6 advertiser"
panel.
Icons: branding adaptive icon converted to vector drawables (+ PNG
mipmaps, monochrome layer). The debug build is now a separate app —
applicationIdSuffix .dev, label "Echolot DEV", DEV-badged icon — so it
installs alongside a production build and can't be confused with it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
IPv6: absence is no longer a defect. If the network never provisioned v6
(no global address, no ::/0 route) the finding is ipv6.not_offered at INFO
(green) — most networks are still IPv4-only. If v6 IS advertised but
doesn't work, it's ipv6.broken at MEDIUM (yellow), because half-working v6
stalls connections. Verified on-device: our LAN advertises a v6 default
route with no path, and now reports ipv6.broken.
Autorun: `am start ... --ez autorun true` runs the suite immediately,
POSTs the report to the collection endpoint, shows the result for 3s and
finishes the activity (stays open if the upload failed). receiver.py gains
POST /report + GET /reports + GET /report/<name>. Verified end to end: one
adb command, report retrieved over HTTP, app closed itself.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Hand-rolled RFC 5389/5780 STUN client (stdlib only) that exercises the
server's stun-5780 capability: one socket, three binding requests
(primary, OTHER-ADDRESS alternate IP, CHANGE-REQUEST port) — the
comparison classifies NAT mapping and filtering behavior.
Verified on the OnePlus: local 10.13.102.124 -> mapped
178.191.120.247:53259 (behind_nat true), alternate address answered from
the server's second IP, mapping endpoint-independent, filtering
address/port-dependent. Finding nat.symmetric (medium) for the
P2P-hostile case.
Two real bugs found by running it: port preservation was misread as "no
NAT" (compare addresses, not ports), and an unbound socket reports the
wildcard local address (resolve via a throwaway connected socket).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Ran on the OnePlus with Shizuku started: tiers.shizuku=true, test ok,
commands_ok 7/7, exec_path=UserService (dual-path executor picked the
right path for this device). Evidence includes the live neighbor table,
per-table v6 routes, a real [NEIGH] netlink event, IpClient DHCP logs with
APF caps, and the wifi dump — as shell(2000).
Both v1 privilege tiers (app + shizuku) now verified end to end in the
production app on hardware. Report archived.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Resolves the server's canary zone through the platform resolver and
compares against the spec-frozen ground truth (probe-protocol §6.1):
reference records detect answers rewritten in flight, and a per-run nonce
name (uncacheable) proves the query reached the authoritative server.
Findings: dns.answer_rewritten (high), dns.authoritative_unreachable
(medium).
Verified on the OnePlus against the deployed fmr zone: 4/4 reference
records matched exactly, nonce name answered 192.0.2.21 with
reached_authoritative=true. First full client<->server measurement loop
on real hardware; report archived.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Network churn (SSID jump/roam) makes adbd re-publish its advertisement
repeatedly; each resolve re-arms the connection and posts a notification,
so the resolve-once guard can't fully prevent spam on the OnePlus. Noted
the alternatives (manual port, or Shizuku `ss` with no mDNS involved).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Re-resolving adbd's own mDNS advertisement is what caused the notification
spam; resolving once per service instance (guard cleared on loss) keeps
rotation tracking intact — verified live, a 37089->33667 rotation was
reported 6s later and reconnected.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
