mrambossekandClaude Opus 4.8
878f7c9c27
Control one or two xTool SafetyPro AP2 air purifiers over BLE and expose them to Home Assistant via an ESP32 (the ap2_hub external component): per-slot fan control with live gear sync, runtime-settable flash-persisted MACs, an on-device scanner, M9033 status polling (filter life, serial, firmware), buzzer control, and BLE bonding. Includes the PC debug tool (tools/ap2_ble.py) and the reverse-engineered protocol spec (SPEC.md). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
55 lines
1.6 KiB
Python
55 lines
1.6 KiB
Python
import esphome.codegen as cg
|
|
import esphome.config_validation as cv
|
|
from esphome.components import binary_sensor
|
|
|
|
from . import AP2Hub
|
|
|
|
CONF_AP2_HUB_ID = "ap2_hub_id"
|
|
CONF_SLOT = "slot"
|
|
CONF_TYPE = "type"
|
|
|
|
# "connected" / "bonded" are per-slot; "scan_active" is a hub-level flag.
|
|
TYPES = ["connected", "bonded", "scan_active"]
|
|
_SLOT_TYPES = ("connected", "bonded")
|
|
|
|
|
|
def _validate(config):
|
|
has_slot = CONF_SLOT in config
|
|
t = config.get(CONF_TYPE)
|
|
if t is None:
|
|
t = "connected" if has_slot else None
|
|
if t is None:
|
|
raise cv.Invalid(
|
|
"set 'type: scan_active', or give a 'slot' for a connected/bonded sensor"
|
|
)
|
|
config[CONF_TYPE] = t
|
|
if t in _SLOT_TYPES and not has_slot:
|
|
raise cv.Invalid(f"type '{t}' requires a 'slot'")
|
|
if t == "scan_active" and has_slot:
|
|
raise cv.Invalid("type 'scan_active' must not have a 'slot'")
|
|
return config
|
|
|
|
|
|
CONFIG_SCHEMA = cv.All(
|
|
binary_sensor.binary_sensor_schema().extend(
|
|
{
|
|
cv.GenerateID(CONF_AP2_HUB_ID): cv.use_id(AP2Hub),
|
|
cv.Optional(CONF_TYPE): cv.one_of(*TYPES, lower=True),
|
|
cv.Optional(CONF_SLOT): cv.int_range(min=0, max=1),
|
|
}
|
|
),
|
|
_validate,
|
|
)
|
|
|
|
|
|
async def to_code(config):
|
|
var = await binary_sensor.new_binary_sensor(config)
|
|
parent = await cg.get_variable(config[CONF_AP2_HUB_ID])
|
|
t = config[CONF_TYPE]
|
|
if t == "connected":
|
|
cg.add(parent.set_connected_sensor(config[CONF_SLOT], var))
|
|
elif t == "bonded":
|
|
cg.add(parent.set_bonded_sensor(config[CONF_SLOT], var))
|
|
else:
|
|
cg.add(parent.set_scan_active_sensor(var))
|